Toyota FJ Cruiser Forum

OK, it called the "Combination Meter" (in other words the wires that run the dash gauges) I'm doing a complete re-wire for a friend, and the Haynes manual has the following schematic for the round plug that goes in the back of the dash. (which they only list ten plugs, this one has 12)

1) Ground
2) Oil Pressure gauge/sender
3) From ignition switch (or it would if there was a wire in that slot)
4) Fuel Gauge
5) Temp Gauge
6) High beam indicator
7) Reed switch/Emission control (WTF?)
8) RH turn indicator
9) LH turn indicator
10) Meter pilot light/switch (empty)
11) ? (Has a wire)
12) ? (Has a wire)

Any one have a better (accurate) schematic for this plug? Email me at speedwaybrew@gmail.com if you have a solution....

Thanks

here's the slots and original wire colors for each:

1) White/Black
2) Yellow/Blue
3) Empty
4) Blue/Red
5) Yellow/Red
6) Grey
7) Red/Yellow
8) Blue/White
9) Green/Yellow
10) Empty
11) Green/Black
12) Red/Black